From filling to charging: a guide to daily use and maintenance of e-cigarettes

As a professional e-cigarette manufacturer, Sanlei is well aware that the correct use and maintenance of e-cigarettes can not only improve the user experience, but also extend the product life. The following is a detailed introduction to the key points of daily use and maintenance of e-cigarettes.

Charging
Use the original charger: Be sure to use the original charger that comes with the e-cigarette. Non-original chargers may cause voltage instability, damage the battery, and even cause safety hazards. The parameters of e-cigarette batteries of different brands and models are different. The original charger is precisely matched to ensure charging safety and efficiency.
Choose a suitable charging environment: When charging, place the e-cigarette in a well-ventilated, dry place away from flammable materials, and avoid charging in high temperature and high humidity environments. Never charge while sleeping to prevent accidents. Generally speaking, charge according to the time recommended in the product manual, and unplug the charger in time after it is fully charged to prevent overcharging and damaging the battery.

Oil filling (for oil-fillable e-cigarettes)
Choose high-quality e-liquid: Ensure that the quality of the e-liquid is reliable and the source is regular, and avoid purchasing three-no products. Inferior e-liquid may contain harmful substances, affecting health and user experience. Choose e-liquid according to your own taste preferences and nicotine needs. For the first time, you can try low-nicotine e-liquid.
Correct oil filling operation: Before filling, read the product instructions carefully to understand the location and method of filling. Usually use a pointed bottle to slowly drip the e-liquid into the atomizer, and pay attention to controlling the amount of oil filled, generally 0.5-1 ml at a time. Too much oil filling can easily lead to oil leakage, and too little oil may cause the atomizer to dry burn, damage the equipment and produce a burnt smell. After filling the oil, shake it gently to allow the e-liquid to fully contact the atomizer core.

Daily use
Maintain the correct smoking posture: the mouthpiece is tilted upward at about 45°, the experience is best, and avoid smoking with the cigarette rod upside down. When smoking, take a small and slow puff, and each puff should last for 2-3 seconds. Do not inhale too hard to avoid inhaling too much e-liquid or causing choking. Do not smoke continuously for a long time, and give your body and equipment proper rest time.
Pay attention to the use environment: E-cigarettes should not be used in high temperature, high humidity or extremely cold environments. Extreme environments will affect their performance and service life. When used outdoors, prevent the e-cigarette from severe collisions and falls to avoid damage to the internal structure.

Maintenance
Clean the device regularly: Use a soft, damp cloth to gently wipe the e-cigarette shell to remove surface dirt and fingerprints. For the atomizer part, replace or clean it regularly. If the frequency of use is high, it is recommended to clean it at least once a week. When cleaning, disassemble the relevant parts according to the product instructions, rinse with warm water, and assemble and use them after drying naturally to prevent the atomizer from clogging and producing odor.
Check the condition of the parts: Check the cartridges, atomizer cores, batteries and other parts regularly. If the cartridges are found to be leaking, replace them in time; if the atomizer core has been used for a period of time and the amount of smoke has decreased or the taste has deteriorated, consider replacing it; if the battery life is significantly shortened, you may need to replace the battery or contact after-sales consultation.
Proper use and maintenance of e-cigarettes can bring you a more stable and comfortable experience. If you have any questions during use, please feel free to contact us, we will serve you wholeheartedly.